Steel innerspring coils in a mattress assembly

Coil Gauge in Mattresses: What the Numbers Mean

Coil gauge is the thickness of the steel wire used to make a mattress spring, and the scale runs backward: a lower number means thicker, stiffer wire, and a higher number means thinner, more flexible wire. Sleep Foundation reports that mattress coils commonly range from 13 to 17 gauge. A 13 gauge coil is the thicker one, and a 17 gauge coil is the thinner one. Gauge is one input into how a hybrid or innerspring mattress feels, and it only makes sense next to coil type, coil count, height and the comfort layers on top.

Guestlysleep
Choose a Mattress With Materials in Mind
Compare Guestly Sleep’s fiberglass-free, American-made mattresses by comfort level and sleep position to find an option that suits you.
Explore mattress options

TL;DR

  • Gauge measures wire thickness. Lower number, thicker wire, firmer support. Higher number, thinner wire, softer and more responsive feel.
  • Gauge is not coil count. Count is how many springs are in the mattress, and type describes the spring design (pocketed, Bonnell, offset).
  • No single number tells you quality. Read gauge, count, type, tempering, height and comfort layers together.
  • Your sleep position and body weight usually matter more than any one spec. Use the trial period to confirm the feel.
  • A mattress with fewer questions about hidden materials is easier to live with. Ask what is inside, not only how many coils.

Table of Contents

What coil gauge actually measures

Inside an innerspring or hybrid mattress sits a layer of steel springs. Each spring is bent from a length of wire, and gauge describes how thick that wire is. The odd part is the numbering. Wire gauge systems count how many times the wire was drawn through smaller and smaller dies, so a thinner wire carries a bigger number. That is why a 13 gauge coil is thicker than a 15 gauge coil, and a 15 is thicker than a 17.

The range you will see in product specs is narrow. Sleep Foundation puts it at roughly 13 to 17. Specs from mattress testing standards use the same scale: the ASTM F1566 standard for evaluating innersprings and mattresses describes a standard test innerspring built from 13 gauge tempered steel wire, which it gives as 2.34 mm thick.

What coil gauge actually measures

The difference between one gauge number and the next looks tiny on paper, a fraction of a millimeter. In a spring that gets compressed thousands of times a night, it is enough to change how much force it takes to push the coil down.

A quick reference

Gauge Wire What it generally means
12 to 13 Thicker Resists compression more, firmer and more supportive feel
14 to 15 Middle Balanced support with some give
16 to 17 Thinner Compresses more easily, softer and more flexible, often used where a coil needs to move on its own

Treat this table as a rule of thumb, not a guarantee. The firmness a sleeper feels depends on much more than wire thickness.

How gauge affects firmness and support

All else being equal, thicker wire pushes back harder. According to Sleep Foundation, a lower gauge number gives firmer support, while a higher gauge number compresses more easily and tends to feel softer, more flexible and more responsive.

The science agrees on the direction. A 2022 peer-reviewed study on mattress coil spring fatigue and weight-bearing support states that coil count, coil gauge and working turns are directly related to mattress firmness and durability, and that a lower gauge means thicker wire and firmer support.

“All else being equal” is doing a lot of work in that sentence. Here is what else changes the feel:

  • Coil type. Pocketed coils are wrapped individually and move independently. Bonnell and offset coils are linked in a connected grid.
  • Number of turns. More turns in the wire make a spring more flexible at the same gauge.
  • Coil height. A taller coil has more travel before it bottoms out.
  • Zoning. Many mattresses use firmer wire under the hips and softer wire under the shoulders and legs.
  • Comfort layers. Foam or latex above the coils decides how the surface greets your body, long before you feel the wire.

That last point is why two mattresses with the same gauge can feel nothing alike. If you want to see how the surface layers shape what you actually feel, our guide to how to choose mattress firmness walks through it.

Gauge, coil count and coil type are three different specs

Shoppers often blend these together. They answer different questions:

  • Gauge is how thick the wire is.
  • Coil count is how many springs are in the mattress.
  • Coil type is the design of the spring: pocketed, Bonnell, offset or continuous.

Sleep Foundation notes that count cannot be compared across types, because pocketed systems use many smaller coils while Bonnell and offset systems use fewer, larger ones. A pocketed queen with 800 coils and an offset queen with 400 coils are not an 800 versus 400 contest.

The ASTM standard shows how independent the specs are. Its standard test innerspring has 312 coils and 13 gauge wire, two separate numbers describing one assembly. The same document defines a posturized innerspring as one with varying coil density or varying wire gauge, which is the technical name for zoned support.

Why a single number misleads

The Sleep Foundation glossary says coil count on its own does not meaningfully describe feel, performance or durability, and should be read together with gauge, coil type and the overall construction. The same logic applies to gauge. A thick 13 gauge coil under a thin layer of foam can feel hard. A thinner coil under a deep, contouring comfort layer can feel plush and still be well built.

How many coils is enough?

This is the question that brings many people to the gauge conversation in the first place. Two reference points:

  • For a queen, Sleep Foundation reports a range of 400 to 1,200 coils and suggests, as a rule of thumb, avoiding fewer than 400. It adds that count alone does not establish sturdiness or durability.
  • The 2022 study reports minimum coil-count recommendations of 300 for a full, 375 for a queen and 450 for a king.

Those numbers are floors, not targets. Above them, extra coils add little unless the gauge, tempering, height and shape are also right. Sleep Foundation lists metal quality, tempering, coil height, gauge, shape and turns as the construction factors worth knowing.

Does gauge affect durability?

The 2022 study links gauge, count and working turns to both firmness and durability, which is why coil fatigue (springs losing their resistance with repeated use) gets so much attention in mattress engineering. Industry testing reflects the same concern: ASTM F1566 covers firmness, firmness retention, durability, impact and height change among the measures used to evaluate mattresses and their components.

A practical reading: a mattress is a system, and its lifespan depends on the coils, the foam above them, the base beneath and your body weight. Thicker wire is not automatically longer lasting if the foam on top breaks down first. That is part of why we suggest replacing a mattress every 2 to 4 years instead of treating it as a decade-long purchase, a point we return to below.

What the coil gauge means for your sleep position

Use gauge as a clue, then check the finished mattress against how you sleep.

Side sleepers need the shoulders and hips to sink in while the spine stays level. A mattress with a softer surface and flexible coils in the upper zones often suits this. Our guide on what firmness is best for side sleepers covers the detail.

Back sleepers generally want support under the lower back with moderate cushioning, which is where a balanced gauge and medium to medium-firm feel tends to work.

Stomach sleepers need the hips held up so the lower back does not arch. Firmer, thicker-wire support under the midsection helps here.

For a full walkthrough, see the sleep position firmness guide and our piece on how to pick a mattress by sleeping position.

Body weight matters too. Heavier sleepers press harder on every coil, so a mattress that feels medium to a lighter person can feel soft to them. Lighter sleepers may find thick-wire support feels hard, because they never compress it enough to reach the cushioning.

Sleep-position support needs and coil firmness

What coil mattresses do well, and how to choose a good one

Coils give a mattress bounce, easy movement across the surface and a sleeping feel that is not as enveloping as foam alone. Sleep Foundation notes that coils do not conform as closely as foam, which is why comfort layers on top are there to cushion the body and ease pressure points. Coil types also differ in motion transfer, noise, contouring and flexibility, so the type you choose should match your priorities.

That gives you a short checklist for choosing well:

  1. Pick the coil type for your priorities. Pocketed coils are the usual pick if you share a bed and want less motion transfer.
  2. Check the count against the floor. For a queen, stay above the 400 mark.
  3. Ask for the gauge. If a spec sheet lists none, ask. A brand that knows its construction can answer.
  4. Look for zoning. Different wire or coil density under hips and shoulders suggests support was designed with the body in mind.
  5. Judge the comfort layers. They decide most of what you feel on night one.
  6. Ask what is inside. Foams, fillers and fire barriers vary between manufacturers. If keeping fiberglass and harmful fillers out of your bedroom matters to you, confirm it before you buy.

If you are comparing foam against hybrid builds, our mattress comparison chart lines them up side by side, and our posts on medium vs firm and firm vs soft help you decide what firmness to aim for.

Our perspective

We make fiberglass-free mattresses in the United States, and we talk to a lot of shoppers who arrive with one question: which number should I look for? Coil count, gauge, turns. Our honest answer is that none of them alone tells you whether you will sleep well.

What we care about is the whole mattress. Certified, non-toxic materials. Coils and comfort layers built to work together for your sleep position. A price that lets you replace the mattress every 2 to 4 years, so your sleep surface stays clean instead of aging in place for a decade. We can offer that because we work directly with the manufacturer.

So use gauge as one clue, not a verdict. Then test the finished mattress in your own bedroom. That is why we back ours with a 60-night sleep trial and free shipping. Your body is the best gauge there is.

Justin

Try the feel at home

Numbers only go so far. Our mattress collections are organized by comfort level (Essential Comfort, Enhanced Comfort and Premium Comfort) and by sleep position, so you can start from how you sleep and not from a spec sheet. Every mattress is fiberglass-free and made in the USA, ships free and comes with a 60-night sleep trial.

Guestlysleep

If you would rather not wrestle a mattress up the stairs, we offer setup and disposal as add-ons. Current published prices on our services page are $125 for bed frame installation, $150 for adjustable base installation and $175 for mattress and bed frame installation. Mattress-only disposal is $125, and mattress and bed frame installation with haul away is $250. You can also read about our mattress and bed frame installation.

Common coil gauge myths

“Lower gauge always means a better mattress.” Lower gauge means thicker wire. Thicker is firmer, not automatically better. A softer sleeper may be miserable on thick-wire support.

“More coils always means more support.” Sleep Foundation advises against using a single advertised number as a quality score. Count must be read with gauge, type and construction.

“The coils decide the firmness.” They are a big part of it, but comfort layers and zoning often shape what you feel first. If you are choosing online, our guide on selecting mattress firmness online explains how to read descriptions and reviews with that in mind.

FAQ

What is a good coil gauge for a mattress?

Most mattress coils fall between 13 and 17 gauge, according to Sleep Foundation. A lower number gives firmer support and a higher number a softer, more responsive feel. The right choice depends on your sleep position, body weight and the comfort layers above the coils.

Is 13 gauge or 15 gauge firmer?

Thirteen gauge is firmer because the wire is thicker. Lower gauge numbers mean thicker steel, which resists compression more. A 15 gauge coil is thinner and compresses more easily, so it generally feels softer and more flexible.

How many coils should a queen mattress have?

Sleep Foundation reports 400 to 1,200 coils for a queen and suggests avoiding fewer than 400. A 2022 study gives a minimum of 375 for a queen. Treat these as floors, because count says little about durability by itself.

Is coil gauge the same as coil count?

No. Gauge is the thickness of the wire, while count is how many coils are in the mattress. Coil type is a third spec describing the spring design. All three should be read together with the comfort layers.

Do coils make a mattress less comfortable than foam?

Coils offer bounce and easy movement, and they do not hug the body as closely as foam does. Comfort layers above them provide the cushioning and pressure relief. A well-built hybrid pairs both so you get support and contouring.

Sources

Back to blog